Working Times: Mon - Sat 9.30 - 18.00
Follow us:
Portable Office Cabin
Our modular offices are designed and configured to suit your needs, with or without partitioning, offering temporary office space for a variety of purposes.
-
FROM :-
₹900/- per sq.ft
Maximum number of characters: 500
Specifications of the Structure
The prefabricated building wall and ceiling panels are nominal 3-inch thick with standard sizes from four feet wide by eight feet tall to four feet wide by ten feet tall. Custom heights over ten feet are also available. Panel building construction varies over a wide range. Standard Metal wall panels will have either Embossed 24 ga. prepainted steel or .019 prepainted aluminum skins laminated to 1/8' tempered hardboard both sides of honeycomb or expanded polystyrene foam core. Many more custom panel configurations are available.
Posts are to be of four-piece design to form a non-progressive wall system.
Cavity
of posts will allow use of approved steel electrical boxes that are now required
by
building codes .Prefabricated building posts shall also act as raceways for
phone
lines, data lines, and other electrical lines. The structural elements of the
posts
shall be connected by machine bolts and nuts no more than 18 inch center line.All
extrusions shall be 6063-T5 aluminum, minimum .062 thickness, with a clear
anodized
finish.
Corner posts will be 3 x 3 inch Steel Tube welded to Structural Steel Channel base
frame.
Base channel provides support for wall panels and posts while allowing space for
anchors
or post uplift connectors. Its low profile design is aesthetically pleasing and
eliminates the need for additional base molding. Materials for prefabricated
building
shall be 6063-T5 aluminum, minimum .062 thick, and clear anodized finish.
Capping channel acts as a support for vertical deck loads in addition to serving
as a
continuous diaphragm member. Material is 6063-T5 aluminum, minimum .062
thickness, and clear
anodized finish.
Doors will be 1 3/4 inch thick and standard 42 inch wide by 80 inch tall to accommodate
equipment or
furniture. Door material will match wall panels and be framed in an aluminum
channel
for heavy
traffic areas. Door jamb is a heavy duty extrusion. All doors are factory
prehung
with hinges
and door lockset. Windows are 2 'x 2' with 1/4 inch tempered safety glass.
Extrusions
are 6063-T5
aluminum, minimum .062 thickness, with clear anodized finish.
An office container comes with aluminium or PVC windows. Optional extras include PVC or aluminium shutters, security bars or steel railings, extra large windows, blinds, and mosquito nets.
Standard Steel faced, foam core, flat metal panels. Optional Gable Roof Panels with
3 in
12 pitch,
panels are Steel faced with foam core.
The ceiling of an office container is 50mm thick insulated polyurethane, and the surface of the base is a vinyl-coated fibre cement panel
Surface Mount Fluorescent light fixtures are 2' X 4', 4-TUBE, 120v, less tubes.
Duplex
outlets and
light switches, 120v, with approved electrical box and post prep. Sub panel and
breakers.
Standard 1 1/8” thick Plywood with 12 x 12 x 1/8 inch vinyl floor tile. Optional Steel
or Parquet and ceramic flooring options are also available.
© GoldenCabins2024 | Created with by WebInovator